Wicd wep validating authentication dating place guwahati

update:checked "use d Bm to measure signal strength" under Preferences and -1 turned to -58d Bm and the signal meter is now full... Hi guys I've spent the last few days trying to get my wireless working on my laptop, which I have just installed Gentoo on.The command not found messages mean you don't have iproute2 installed, not to worry however as you iwlist wlan0 scan was successful. Make sure to try without anything connected to your ethernet. Cheers, John jserink, here are the commands that you told me to try and there outputs, some of the commands weren't recognized (its probably me typing them in wrong) thanks a lot for all the help :) its much appreciated iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:0F: B5: B4: DC:20 Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-38 d Bm Encryption key:on ESSID:"12AMain21" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode: Master Extra:tsf=000000ce19685121 Extra: Last beacon: 901ms ago IE: Unknown: 00093132414D61696E3231 IE: Unknown: 010582848B962C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 32080C1218243048606C Cell 02 - Address: : AF: E Channel:3 Frequency:2.422 GHz (Channel 3) Quality=40/70 Signal level=-70 d Bm Encryption key:on ESSID:"porkchop" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode: Master Extra:tsf=0000096a12d3b180 Extra: Last beacon: 906ms ago IE: Unknown: 0008706F726B63686F70 IE: Unknown: 010482848B96 IE: Unknown: 030103 IE: Unknown: 2A0100 IE: Unknown: 32080C1218243048606C IE: Unknown: DD1E00904C334E101DFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3403050500000000000000000000000000000000000000 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F202010100000364000027A4000041435E0061322F00 Cell 03 - Address: :4D: F: FA Channel:11 Frequency:2.462 GHz (Channel 11) Quality=50/70 Signal level=-60 d Bm Encryption key:on ESSID:"SKY65780" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode: Master Extra:tsf=00000033fe0b7d81 Extra: Last beacon: 209ms ago IE: Unknown: 0008534B593635373830 IE: Unknown: 010882848B0C12961824 IE: Unknown: 03010B IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101050003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010024FF7F Cell 04 - Address: 00:1F:33: B7: A Channel:1 Frequency:2.412 GHz (Channel 1) Quality=36/70 Signal level=-74 d Bm Encryption key:on ESSID:"Robertson" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode: Master Extra:tsf=0000096cb01b7757 Extra: Last beacon: 1183ms ago IE: Unknown: 0009526F62657274736F6E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: DD090010180200F0000000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 Ok john, great. Ok the log files are as follows showing a restart of wicd With the Ethernet cable plugged in 2010/08/30 :: eth0: acknowledged 192.168.0.2 from 192.168.0.1 2010/08/30 :: 2010/08/30 :: eth0: checking 192.168.0.2 is available on attached networks 2010/08/30 :: 2010/08/30 :: eth0: leased 192.168.0.0 seconds 2010/08/30 :: 2010/08/30 :: 2010/08/30 :: DHCP connection successful 2010/08/30 :: Connecting thread exiting. 2010/08/30 :: Exception Key Error: Key Error(140254962378496,) in ignored 2010/08/30 :: --------------------------- 2010/08/30 :: wicd initializing...This means you HW config anf operation is coirrect. The command not found messages mean you don't have iproute2 installed, not to worry however as you iwlist wlan0 scan was successful. Make sure to try without anything connected to your ethernet. Cheers, John Right i've checked all the settings that you've said and they all match, so I don't think its that. 2010/08/30 :: Sending connection attempt result Success 2010/08/30 :: Daemon going down, killing wicd-monitor... 2010/08/30 :: --------------------------- 2010/08/30 :: wicd is version 1.7./08/30 :: setting backend to external 2010/08/30 :: trying to load backend external 2010/08/30 :: successfully loaded backend external 2010/08/30 :: trying to load backend external 2010/08/30 :: successfully loaded backend external 2010/08/30 :: Automatically detected wireless interface wlan0 2010/08/30 :: setting wireless interface wlan0 2010/08/30 :: automatically detected wired interface eth0 2010/08/30 :: setting wired interface eth0 2010/08/30 :: setting wpa driver wext 2010/08/30 :: setting use global dns to False 2010/08/30 :: setting global dns 2010/08/30 :: global dns servers are None None None 2010/08/30 :: domain is None 2010/08/30 :: search domain is None 2010/08/30 :: setting automatically reconnect when connection drops True 2010/08/30 :: Setting dhcp client to 0 2010/08/30 :: Wireless configuration file found... 2010/08/30 :: chmoding configuration files 0600...I'm starting to get to the point where i'm altering stuff which I have next to no knowledge about and I'm worried that I'm going to break something Anyway, the problem i'm having, is that when I try to connect to my home wireless connection (through wicd), it is unable to obtain an ip address.Though if I plug in directly using Ethernet, it connects fine.I have no idea where to go from here so any help would be much appreciated The wireless card I have in my laptop is: Also it always seems that the first thing people ask for is certain config files the outputs of certain commands I will list these her now (I know theres a lot). # lspci -n .0 0600: 8086:2a00 (rev 0c) .0 0300: 8086:2a02 (rev 0c) .1 0380: 8086:2a03 (rev 0c) 00:1a.0 0c03: 8034 (rev 02) 00:1a.1 0c03: 8035 (rev 02) 00:1a.7 0c03: 803a (rev 02) 00:1b.0 0403: 804b (rev 02) 00:1c.0 0604: 803f (rev 02) 00:1c.1 0604: 8041 (rev 02) 00:1c.4 0604: 8047 (rev 02) 00:1d.0 0c03: 8030 (rev 02) 00:1d.1 0c03: 8031 (rev 02) 00:1d.2 0c03: 8032 (rev 02) 00:1d.7 0c03: 8036 (rev 02) 00:1e.0 0604: 8048 (rev f2) 00:1f.0 0601: 8015 (rev 02) 00:1f.1 0101: 8050 (rev 02) 00:1f.2 0106: 8029 (rev 02) 00:1f.3 0c05: 803e (rev 02) .0 0c00: 1132 (rev 05) .1 0805: 1122 (rev 22) .2 0880: 1143 (rev 12) .3 0880: 1192 (rev 12) .4 0880: 1152 (rev 12) .0 0200: 11ab:4354 (rev 12) 0b:00.0 0280: 14e12 (rev 01) # cat /etc/conf.d/net # This blank configuration will automatically use DHCP for any net.* # scripts in /etc/init.d.

wicd wep validating authentication-59wicd wep validating authentication-20wicd wep validating authentication-59wicd wep validating authentication-86

I am running an up to date Squeeze system using LXDE. Since doing a full upgrade on Monday I have been unable to connect to my home wireless network. Since the only place to do this is sitting directly in front of my desktop system it kind of defeats the purpose.

There is a page that talks about which apps to use for this and that, set all of these to 'auto'. If not already running like this: wicd-client & Ok, now I think your problem is wicd settings not anything to do with your h W since the scan worked. 2010/08/30 :: No wired connection present, attempting to autoconnect to wireless network 2010/08/30 :: Unable to autoconnect, you'll have to manually connect 2010/08/30 :: Autoconnecting... 2010/08/30 :: Running DHCP with hostname localhost.localdomain 2010/08/30 :: eth0: dhcpcd 4.0.15 starting 2010/08/30 :: 2010/08/30 :: eth0: broadcasting for a lease 2010/08/30 :: 2010/08/30 :: eth0: offered 192.168.0.2 from 192.168.0.1 2010/08/30 :: 2010/08/30 :: eth0: acknowledged 192.168.0.2 from 192.168.0.1 2010/08/30 :: 2010/08/30 :: eth0: checking 192.168.0.2 is available on attached networks 2010/08/30 :: 2010/08/30 :: eth0: leased 192.168.0.0 seconds 2010/08/30 :: 2010/08/30 :: 2010/08/30 :: DHCP connection successful 2010/08/30 :: Connecting thread exiting.

Make sure your setting for wireless interface is set to 'wlan0'. There is a page that talks about which apps to use for this and that, set all of these to 'auto'. 2010/08/30 :: No wired connection present, attempting to autoconnect to wireless network 2010/08/30 :: Unable to autoconnect, you'll have to manually connect 2010/08/30 :: Autoconnecting... 2010/08/30 :: Sending connection attempt result Success2010/08/30 :: wlan0: carrier lost 2010/08/30 :: 2010/08/30 :: canceling connection attempt 2010/08/30 :: wlan0: received SIGHUP, releasing lease 2010/08/30 :: 2010/08/30 :: 2010/08/30 :: DHCP connection successful 2010/08/30 :: exiting connection thread 2010/08/30 :: running kill dhcp. 2010/08/30 :: Exception Key Error: Key Error(140381399238400,) in ignored 2010/08/30 :: --------------------------- 2010/08/30 :: wicd initializing...

wicd seems to be a very nice wireless networking interface. Here I checkbox "Use Encryption", and select "WPA 1/2 (Passphrase)", enter my passphrase and click OK.

p=208257#208257Summary: The ibook, when it was Mac OS X, did connect to my WPA2 network. With debian-40r7-Power PC-xfce I'm not having any luck. Wicd Manager does display my ESSID but as "-1% WEP." I click the arrow drop down expansion and click the "Advanced" button.

Leave a Reply